Non Invasive Fat Removal Machine

It integrates HIFM high-intensity focused electromagnetic vibration + RF technology and compression micro-vibration + red-blue light technology, realizing "muscle building, fat burning, skin tightening, and anti-aging" in one machine. It can be used for both body shaping (such as abdomen, buttocks, thighs) and facial care (such as wrinkle reduction, swelling elimination), replacing multiple single-function beauty equipment.

The device is 100% non-invasive and painless, with no side effects. The HIFM module drives muscle movement through magnetic vibration energy, not electromagnetic radiation-its radiation level is lower than that of regular mobile phones, meets national safety standards for electrical appliances, and has obtained US FDA certification, being widely used in foreign hospitals. The Inner Ball Roller's compression micro-vibration therapy is also clinically proven safe, with no skin traction or suction damage.

Women: Those pursuing buttock lifting, waistline sculpting, postpartum abdominal rectus diastasis repair (1 month after natural delivery, 3 months after cesarean section).

Men: Those wanting to build muscle and create a chiseled "chocolate muscle" physique.

Busy professionals: Those needing efficient weight loss and body shaping without spending time on gym workouts.

Special groups: Brides, models, actors requiring quick body transformations; people troubled by cellulite, sagging skin, facial wrinkles, or muscle soreness.

Contraindicated for HIFM + RF mode: Pregnant, breastfeeding, or menstruating women; patients with heart disease, hypertension, malignant tumors, renal failure, epilepsy, or muscle strains; people with metal/electronic implants (such as metal IUDs, pacemakers, stents); patients with thrombophlebitis, stroke history, or brain surgery experience.

Contraindicated for Inner Ball Roller mode: Pregnant or breastfeeding women; those with open wounds, recently sutured incisions, or skin diseases (dermatitis, eczema, herpes, etc.) in the treatment area; patients with thrombophlebitis, acute chronic diseases in exacerbation, infectious diseases, or tumors; people with metal plates, prosthetics, or pacemakers near the treatment area; those who received hyaluronic acid fillers within 30 days.

The treatment process is comfortable and painless, requiring no anesthesia. When using the HIFM + RF mode, you will feel muscles contracting intensely (similar to the soreness after high-intensity exercise) but no sharp pain. The Inner Ball Roller mode feels like a deep tissue massage-gentle pushing and kneading with adjustable intensity, suitable for different tolerance levels. You can resume normal life immediately after use, with no downtime.

HIFM + RF mode: Initial effects (such as muscle firmness, slight waistline reduction) can be seen after 4 treatments; significant results (increased muscle density, obvious fat loss) appear after 8-12 weeks. After 6 courses of treatment, results can last up to 1 year; maintaining 1 course every 2-3 months ensures long-term optimal results.

Inner Ball Roller mode: Initial improvements in skin firmness and cellulite reduction are visible after 6-12 treatments. The best results are achieved after 12-18 courses; for severe sagging or overweight, 24 courses may be needed. Monthly maintenance treatments can sustain or enhance the effects.

HIFM + RF mode: Remove all metal objects from the body and clothing; ensure the treatment area is dry (no clothing barrier for RF function); each part is treated for 30 minutes, with a daily total treatment time not exceeding 1.5 hours; start with low intensity (8% RF, 3HZ frequency) and gradually increase based on comfort; avoid ribs, bones, head, neck, and chest areas; treat 1 hour after meals, and do not eat or drink during treatment.

Inner Ball Roller mode: Remove accessories, use on bare skin or disposable underwear; clean the roller balls (do not soak in liquid) before use, and apply massage cream/essential oil to the treatment area; adjust rotation direction (opposite to the application direction) and speed (0-9 gears); after use, wipe residual cream/oil, clean the balls with saline or alcohol, and keep them dry; do not put fingers into the handle groove during operation to avoid pinching.

HIFM technology can penetrate 8cm deep into muscle tissue, but if the fat layer is too thick, energy may not fully reach the muscles, affecting contraction effects. It is recommended that people with excessive fat first use the Inner Ball Roller mode or combine with non-invasive fat reduction treatments to reduce fat thickness, then use the HIFM + RF mode for muscle building.

HIFM + RF mode: It is recommended to use it 2-3 times a week, with an interval of at least 48 hours between treatments; 6 treatments constitute a course.

Inner Ball Roller mode: Use 2-3 times a week (minimum 48 hours interval between treatments); 12-18 treatments constitute a course, with a single treatment time of 45-90 minutes depending on the area size.

Yes. It can be combined with non-invasive fat reduction equipment to enhance fat-burning effects, or with postpartum repair treatments to improve maternal physical recovery. However, avoid combining it with invasive procedures (such as surgical liposuction) or treatments involving skin breakdown within 1 month.

HIFM handles: Check if the black film on the energy output area is intact (stop using if damaged to avoid skin burns); wipe the handle surface with a dry cloth after use.

Inner Ball Roller: After each use, remove the roller balls, wipe them with saline or alcohol (do not immerse in liquid), dry thoroughly before reinstallation; avoid scratching the silicone balls with sharp tools.

Overall maintenance: Keep the device in a dry, well-ventilated environment; avoid placing metal objects or electronic products on the device during operation; ensure the power cord is not damaged.

Yes, the Inner Ball Roller's small handle is specially designed for the face, neck, and shoulders. It stimulates collagen and elastin production, improves blood circulation and oxygen supply, reduces expression wrinkles, puffiness, and eye bags, brightens dull skin, and resists facial sagging-achieving obvious facial rejuvenation and firming effects.

Automatic mode: Equipped with 5 preset modes (M1-M5) from beginner to professional level. M1 is basic training for novices, M5 is professional training; each mode automatically switches 6 different frequencies, with the first minute as warm-up-suitable for users who are new to the device or prefer one-click operation.

Manual mode: Allows customization of F1-F3 frequency parameters (3-150HZ adjustable), with F1 working for 5 minutes, F2 for 1 minute, and F3 for 5 minutes in a cycle. The recommended setting is F1=50HZ, F2=5HZ, F3=150HZ-suitable for experienced users or those with specific muscle training needs.

After HIFM + RF treatment: Avoid eating for 1 hour; drink plenty of water and consume high-protein foods to help muscle repair and fat metabolism.

After Inner Ball Roller treatment: Wipe off residual massage cream/essential oil on the skin; for facial use, follow up with a moisturizing mask or essence; use mild, non-irritating skin care products to avoid irritating the treated area.

Magnetic vibration intensity: 7 Tesla; magnetic resonance wave frequency: 3-150HZ.

RF parameters: 40-50℃ temperature, 40.68M frequency; HIFM output power: 300W-3000W.

Roller speed: Up to 900rpm (9 adjustable gears); light therapy: Red + blue light (freely switchable).

Display: 10.4-inch touch screen; input voltage: AC110V/220V; package size: 56×66×117cm (flight case); gross weight: About 67kg.